Aomei-partition-assistant-9-13-1-crack-is-here-all-editions
AOMEI Partition Assistant 9.15.0 Crack is an easy to use and safe Hard Disk manager software that offers you various partition management facilities both for Home and Commercial use. The software builds with an easy to use interface followed by a step-by-step wizard for different hard disk management tasks. You can even clone your entire hard disk with software such as the power offered in AOMEI Partition Assistant. You can migrate your OS from your HDD to SSD or vice versa without reinstalling new Operating Systems or Applications.
aomei-partition-assistant-9-13-1-crack-is-here-all-editions
AOMEI Partition Assistant offers various conversions without any data loss. You can Convert from Master Boot Record (MBR) to GPT (GUID Partition Table) or vice versa. You can also Convert from your Dynamic Disk to Basic Disk. You can convert drive types like Converting FAT32 partition to NTFS partition or vice versa. Lastly, you can Convert your Logical Partitions to Primary Partitions or vice versa.
When remove the drive letter failed. - eg.when partition operations such as resizing partitions, the program needs to unmount the target partition to prevent users from reading the data in it. If the program failed to unmount, you will get this notice.
When the program is manipulating partition operations, the target partition should be locked to avoid interrupting by data changing from other programs, however those obstinate applications such as anti-virus and firewall cannot be stopped normally. The program fail to lock the partition then you will be given this error code.
In operation of partitioning, partitions need to be locked firstly, when the operation has been finished, the program will unlock the target for you, if the unlock process failed, you will be given this error.
If you get this error when converting a data disk from MBR to GPT, please check if the starting position of the first partition is greater than 32 (right-click on the partition, choose Properties-->Partition Info and check the value of "First physical sector"), if it is greater than 32 you can directly delete all the partitions on this disk and then convert it to GPT. Finally use the Partition Recovery Wizard to retrieve the deleted partitions.
You may be told to restart to PreOS mode when applying some partition operations, then program will save the operations into a configuration file named ampa.ini which is located in the directory of C:\Windows. Partition Assistant under PreOS mode will need to read the instructions in ampa.ini to finish the operations. You will be given this error code if the process of writing the ampa.ini failed.
Some operations should be done under "PreOS" mode, program then needs to add the "ampa" information to the registry item named "BootExecute" which is lying in "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager" for the execution after reboot to run "C:\Windows\ampa.exe" to finish the task. You will be given the error code when writing to registry fails.
If you are able to boot your system next time after the operation, then you should no more care it. If you are not able to boot from any or all your installed system, you could insert your Windows XP installation CD and get into system failure console to fix the boot.ini with bootcfg or fixboot, for detailed instructions you can search google for "bootcfg", "fixboot".
You may be given the error code when applying merging partitions. The process of merging partitions needs to copy files from one to another partition, the copying might be interrupted by unknown reasons, then the copying process fails.
In the operation of merging your partitions, you may encounter troubles like the insufficient space on destination partition, or a single file is too large so the destination partition has no enough space for it, then you will be given the error code.
1. We suggest you to delete the unused files to release more space for the two partitions to be merged before do the merging operation; each partition should leave more free space (5GB or more) for the operation.
2. Another way for merging two partitions: you can copy the files manually to another partition then delete the previous partition, after that extend the partition with Partition Assistant to merge them.
You can manually initialize the disk with Windows Disk Management tool then apply the partition operations. For initializing the disk with windows tool please press Win+R then type diskmgmt.mscin the run dialog box then press Enter to run into the management interface to choose the disk to be initialized.
The above errors occur when failed to get volume GUID or create a directory when merging partitions due to unknown reasons. You may reboot your computer and retry it, if the issue persists, we suggest you to copy the files manually to another partition then delete the previous partition, after that extend the partition with Partition Assistant to merge them.
You will receive the error code when there are partitions of FAT16 or FAT12 Format file system. They cannot be resized but can be changed the position by Partition Assistant. However when the program unintentionally resizes these partitions during some operations, you will be given the error code.
Generally because you have multiple operations in the Pending Operation List of Partition Assistant leading to the error. After clicking Apply button on the toolbar, Partition Assistant has a lot of tasks to do contemporaneously, there may be tasks in conflict. So we suggest you to apply them one by one to avoid these problems.
After clicking Apply on the toolbar, it will pop up a Pending Operations window showing the operations to be done, there is an option of "Check partitions before execution". You may be given the error code when the option is enabled and timeout on the check operation, please uncheck the option to retry.
You could right-click the partition in Partition Assistant, and select "Advanced" ->"Check Partition" to fix it. For more details please visit at: "Check your partitions" or try the chkdsk.exe command line to fix the underlying file system errors then retry the partition operation.
The above errors usually appear in the process of creating Ext2 / Ext3 partitions, or formatting file system with Ext2 / Ext3. This may be due to the underlying physical errors on the disk or some unknown inner errors of Partition Assistant.
AOMEI Partition Assistant contains more than 30 valuable functions to optimize the performanceofyour hard disk partition. It can fix the low disk space problem, address the problem ofirrationaldisk partition, and re-partition a hard drive without losing data. In a word, it can manage yourhard disks and partitions in the most reasonable state.
A powerful and FREE partition manager that contains a variety of partition managementfunctions and allows you to manage your partitions and hard drives of PC. You can use it toresize, merge, create, delete or format partitions. It supports WindowsXP/Vista/7/8/8.1/10/11(both 32 and 64 bit). LearnMore 041b061a72